Step 1. Create a circle with a diameter of 85 sketches, on the top plane

Step 2. Boss-Extrude1, to create a pedestal table.
Click Insert> Boss> Extrude
From the property manager, Direction 1
select offset, input the number 75
select the Blind, with a thickness of 5

Step 3. Create a circle with a diameter of 15 sketches, the top plane.

Step 4. Boss-Extrude2, to make the pole table.
Click Insert> Boss> Extrude
From the property manager, Direction 1
select the Up to Surface
select the face that will be made in reference

Last step. circular pattern, to create a table leg.
Click Insert> patern / mirror> circular pattern

 from:

http://solidworkforever.blogspot.com/